LCS Ltd logo
If the dynamic stander Innowalk is a new assistive device to you, you may have many questions. Here you’ll find answers to the questions we are asked the most about the Innowalk. We hope this will be helpful in your search for the best solution for your child, yourself or the person you care about.
1. Who can benefit from using the Innowalk?

The Innowalk is a dynamic stander designed especially for people with limited or no ability to move independently (non-ambulatory). It is suitable for both children, young people and adults. It works by supporting the user in an upright standing position, to allow assisted, guided and repetitive movements in a safe, comfortable way. The Innowalk is suitable for people with moderate to severe disabilities such as: 

  • Cerebral palsy 
  • Syndromes such as Rett and Trisomie 21 
  • Spinal cord injury
  • Spina bifida 
  • Brain injury 
  • MS 
  • Stroke 
2. What benefits can I expect from using the device?

People with disabilities who may be non-ambulatory are often spending a great amount of their waking hours being sedentary. 
The Innowalk allows people with severe disabilities to be physically active. Research has shown that movement in the Innowalk is light physical activity, and it emphasizes the importance of increasing physical activity and reducing sedentary time for people with disability to increase general health outcome, such as respiration, circulation, gastrointestinal function, mobility of muscles and joints, bone mineral density and mental health. 

3. Is there a need of independent mobility or ability to stand to use the Innowalk?

No, the dynamic stander is designed to assure safe and comfortable training, regardless of physical function levels, so there’s no need for independent mobility or ability to stand. 

4. Are there any contra-indications or precautions I should be aware of?

Any bone fractures in the lower limb and/or torso and open skin lesions in areas of the body in contact with parts of the device are contraindications. 

  • Major deformities (in the column and lower limbs) 
  • Severe fixed contractures in the lower limbs (hips, knees and ankles) 
  • Osteoporosis with previous or suspected spontaneous fractures of the lower limbs 
  • Joint instability in the lower limbs (hips, knees, and ankles) 
  • Skin lesions affecting areas of the body coming into direct contact with the device 
  • Circulatory disorders 
  • Respiratory disorders 
  • Cardiac disorders 
  • Epilepsy with uncontrolled seizures 
  • Severe spasticity that prevents proper positioning and movement in the Innowalk 
  • Pain in standing with weight-bearing or during movement of the legs 
5. How long do you recommend someone uses the Innowalk at a time?

In total, we recommend that the person aim for a minimum of 1 hour/day, based on WHO physical activity recommendations. This total can be divided into 2-3 shorter sessions throughout the day. So, for example, the person might undertake 3 sessions lasting for 20 minutes each. However, the amount of time spent in the Innowalk should always be adapted and continuously evaluated in accordance to the user’s current health condition. It is also recommended to start with short sessions in the beginning and gradually increase the amount of time in the device. 

6. How much weight-bearing does the Innowalk allow a person to undergo?

The Innowalk is designed to encourage safe weight-bearing for the user to build up strength and confidence. However, the amount of bodyweight the user will support is depending on the upright position they can achieve. The straighter position, the more weight-bearing is performed by the user. 

7. How much active training can someone expect to get in the Innowalk?

The movement in the Innowalk is designed to be performed in a standing position providing the maximum muscle stretch and weight-bearing. The motorised movement provokes an activity response throughout the whole body. That’s why the training is called dynamic standing. The user can be actively involved in the whole movement cycle with the legs and in addition with the arms using arm handles.  

8. Is it possible to adapt the Innowalk to someone who has contractures and/or scoliosis?

Yes, to some extent it’s possible to support misalignment such as contractures or scoliosis. It will always need an individual assessment to decide on the best solution. If the user has contractures in the hips and knees, this can be compensated by the sit to stand function in the Innowalk, allowing the person to have some grades of flexion in the joints. In cases with scoliosis, it helps to use a brace or other dynamic upper-body support for better positioning and to increase comfort for the user. 

9. Is there a need to use another standing device in addition to the Innowalk?

A complete standing program should always be discussed with a clinician. General guidelines recommend daily standing for 1-2 hours in total. This means it may be necessary to have different devices available to meet all practical needs to reach the recommendations. However, many clinicians believe that the Innowalk covers both static and dynamic standing requirements. 

10. Which sizes are available?

The device is available in 3 sizes to fit users within the size range from 80 – 190 cm. 

Innowalk Small 

  • Height of user 80 – 135 cm
  • Max weight of user 35 kg  

Innowalk Medium 

  • Height of user 125 – 170 cm 
  • Max weight of user 75 kg

Innowalk Large 

  • Height of user 160 – 190 cm 
  • Max weight of user 95 kg 
11. What level of service should I expect to maintain the product?

The Innowalk is a medical device and, as such, an annual service is a minimum requirement. In addition, regular aftercare is needed. This ensures the product is correctly adjusted for the user as they change, due to factors such as growth or altered functioning.  

12. How do I purchase the device for myself or to the one I care about? Is it possible for me to apply for funding or financial support?

Contact LCS Ltd on 071 916 3905  for further information.